EDM Network, Inc.

Wire EDM, Die Sinker, EDM Driller

EDM Network Home page

New CHMER EDMs

CNC Drilling Series

H32CA

AH53C

H64C

H86C

FEATURES:
1.	Easy to make deep and small holes in hard material such as tungsten carbide , hardened steel stainless.
2.	No burr left when drilling thin plates.
3.	Intelligent CNC editing . Machining program is made automatically after inputting electrode pipe.
4.	Multi-hole drilling performed by innovative numerical control.
5.	Compact design for easy access and simple setup.
6.	Easy to make start hole for wire EDM,on oblique surface and exhaust or lubrication holes

SPECIFICATIONS:
MACHINE UNIT		H32C	AH53C	H64C	H86C
Max. workpiece size (WxDxH)	mm/inch	800x400x300 (31.4x15.7x11.8)	440×900×270	540×1000×270	740×1140×350
Max. workpiece weight	kg/lb	180/396	700	800/1760	1500
Table travel (X, Y)	mm/inch	350x250 /13.7x9.8	300x500	400x600 /15.7x23.6	400x600 /15.7x23.6
Ram travel (Z1)	mm/inch	340/13.3	340/13.3	340/13.3	340/13.3
Ram travel (Z2)	mm/inch	200/7.8	200/7.8	150	-
Guide travel	mm/inch	200/7.8	150	150	150
Max. length of Tube electrode	mm/inch	400 (15.7)	400 (15.7)	400 (15.7)	400 (15.7)
Distance between Spindle Platen to Work Table	mm/inch	15-365 (0.5-14.3)	15-365 (0.5-14.3)	35-300 (1.3-11.8)	135-285
Machine Size	mm/inch	1100x910x2200/ 43.3x35.8x86.8	1110x1250x2400	1200x1290x2100	1200×1450×2160
Net Weight	kgs/lb	800/1760	2500	1500/3300	2000

POWER UNIT:
Input power	3KVA
Pluse Generation	Power FET switching
Current	50Amps
Current Setting	9 steps
Pluse width	32 steps /each
lnput voltage	220/440 3ph/60Hz

STANDARD ACCESSORIES: Tool box x 1 Guide dia 1.0 mm x 1 Electrode brass dia 1.0 x 300 mm x 10 Air fast connector x 1 Set of allen spanner x 1 Paint spare x 1 Leveling bolt x 3 Handle for filter cap x 1 Guide dia 0.5mm x 1 Electrode brass dia 0.5 x 300 mm x 10	Insert rubbers 0.5 mm x 3 Insert rubbers 1.0 mm x 3 Machine pad x 3 Clamping screw x 4 Lifting screw x 4 Filter x 1 Flushing pipe x 1 Parallel plate x 1 Flushing nozzle x 1 High precision chuck (for electrode pipe dia.0.2~0.3mm)
OPTIONAL ACCESSORIES: ER Spindle Linear Glass Scale

INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE.

Home | EDMs Nuevos | EDMs Reacondicionados | EDMs Por Agente | Inventario | Consumibles | Piezas | Nuestro Personal | Testimonial | Visita Guiada | En Las Noticias | Especiales | Sobre Nosotros | Contacto