1.
Machine Tool is disassembled down to the
table base riding on the X-Y ways with ball
screws exposed.
- Clean
and lube ways and ball screws.
- Remove
U-V covers, expose ways and screws - clean
and lubricate.
- Disassemble
and glass bead upper and lower head pieces
- remove all calcium buildup and oxidation.
Replace worn guide holder as required.
- Send
work table out for media blast, then regrind
top and bottom flat and parallel. P.O.R.
paint worktable.
- While
disassembled, strip, clean, prep and paint
table area, machine tool casting and sheet
metal panels.
- Reassemble
all components. Replace splash guards, tension
rollers and power cables.
Install new wire guides, power contacts
and flush nozzles.
|
